WARP FIN

Comitted to delivering powerful propulsion through tough currents, these long blade fins are
for expert divers that know exactly
how stiff they like their fins.

  • Snug Boot Pocket Easily attaches with a snug fit
    Close Snug Boot Pocket The long sole and high instep minimize slippage at the toes. The boot pockets are especially designed for Gull GS Boots for an even better fit.

  • Smooth Water Flow Blade Tip Allows water to escape smoothly
    Smooth Water Flow Blade Tip The V-shaped tip of the blade allow water to smoothly flow away from the fin as you kick. This allows the blade to rebound more quickly ultimately allowing you to kick more efficiently without tiring out during your session.

  • Hybrid Rubber Greater Propulsion
    Hybrid Rubber Gull’s innovative production methods integrate varying stiffness levels of rubber for the foot pocket, ribs, and blades of a fin. Each engineered carefully for powerful and smooth propulsion.

  • Raised Ribs Stronger down kicks
    Raised Ribs The raised blade ribs eliminate side planing and blade twist, which would otherwise occur with long fins. Fin work is smooth. The ribs maximize rubber rebound to enable you to enjoy confident, powerful propulsion.

Color Variations

Black
White
Red
Yellow
Caribbean Blue
Black
White
Red
Yellow
Warp Fin S / M

GF-2294[S]/GF-2293[M]
*Different colored Warp Fins have different stiffness.

Warp Fin L / XL

Size

Size Weight Size
a b c
S 850g 590 × 205 × 77 mm
M 900g 630 × 205 × 81 mm
L 1,075g 655 × 215 × 84 mm
XL 1,300g 705 × 220 × 87 mm

WARP FIN Boots Size Fitting Table

Size Barefoot MEW Boots Short MEW Boots 5mm Mew Boots Skin Hot Boots
S 23~24cm 22~23cm 22~23cm
M 25~26cm 24~25cm 24~25cm 23~24cm 23~24cm
L 27~28cm 25~26cm 25~26cm 24~25cm 24~25cm
XL 28~29cm 27~28cm 27~28cm 25~26cm 25~26cm

*This size table is only a guide; fit also depends on the individual form of your feet. For some people the sizes shown may be too large or too small. To ensure a proper fit, please confirm which size suits you at an actual trial fitting.

Performance

Different Colored Warp Fins Have Different Stiffness

[ Hard Spec ]
●Black
○White
Stiffness is similar to Hard Mew. These powerfully catch the water and feel wonderful, like an extension of your legs.Because white is easy to see in the water, it enjoys support by diving guides.


[ Standard Spec ]
●Red
●Yellow
●Caribbean Blue
Stiffness is similar to Mew. This is an all-around model that can accommodate a full range of diving situations. They are designed for ease of use, and offer a comfortable, easy kick, especially during surface movement and when using the flippers.

 

Long Blades

Giving your legs propulsive power even in places with strong water flows, long
blades are the outstanding feature of Warp Fins. With Warp, you can extend your range of diving experience.

Blade Tip Shaped to Catch the Water

With fins designed to make optimal use of the resilient properties of rubber, firmly
catching the water, from the start to the end of the kick cycle, you get solid propulsion.

Foot Pocket Designed to Easily Expel Water

The foot pocket is formed using a thin and pliant rubber material. This makes the fins
easy to put on and take off.